Install the AnaJet mPower AnaRIP software onto aPC. Your PC must have Microsoft Windows XP Windows Vista, Windows 7, Windows 8, or Windows 10 operating system, or on a MAC, some kind of Windows emulation must be running such as Parallels or Boot Camp. The computer also needs to have an USB 2.0 port.
You will need to download the latest version of AnaRIP software for your printer. You can find this software at ricohdtg.com/downloads. At the top of the page, click on the latest version of AnaRIP for your specific printer. You will then be routed to a page with download and installation instructions.
When the software is installed double click the AnaRIP icon to launch the software and then connect the printer to the computer using the provided USB cable. Do not use a USB cable longer than 10 feet or use an unpowered USB Hub since data transmission loss can occur. After the cable is installed place an image into the software by going to File and then Place an image. You will then notice that the Print button at the lower right of the software window will be available, this means that the computer and printer are communicating. If the print button does not become available, unplug the USB cable and plug in back in.