User Manual, Drivers, Firmware & Software Downloads
Instructions/Manuals
RICOH Ri 1000 User Manual PDF (v1.2.6 – Apr. 6, 2020)
RICOH Ri 1000 Troubleshooting Guide
RICOH Ri 1000 Operator Training Manual
RICOH Ri 1000 Operator Panel Overview
RICOH Ri 1000 Firmware Update Instructions
Recommended ColorGate Settings
For instructions on how to use these files, click here.
PS22
Firmware
Release date: January 10th, 2024 - LATEST VERSION
Changes:
- Additional troubleshooting for white circulation.
Previous Versions
Release date: October 31st, 2023
Changes:
- Displays a warning when temperature and/or humidity are out of range.
- Added safety protocol to center table when inactive in low temperatures.
- Additional troubleshooting methods for resolving encoder issues.
Release date: April 24th, 2023
Changes:
- Fixed a bug that the remaining amount may be displayed as 0% when the cleaner cartridge is set.
- Modified Near End/End Threshold value of INK SUPPLY UNIT to match specifications.
Version 1.37.2
Release date: June 13th, 2022
Bug fixes:
- minor bug fixes
Version 1.37.1
Release date: April 5, 2022
For instructions on updating firmware, please refer to Chapter 9 of the RICOH Ri 1000 User Manual.
Bug fixes:
- minor bug fixes
Version 1.37.0
Release date: March 22, 2022
For instructions on updating firmware, please refer to Chapter 9 of the RICOH Ri 1000 User Manual.
Bug fixes:
- minor bug fixes
Version 01.35.9
Release date: December 2, 2021
For instructions on updating firmware, please refer to Chapter 9 of the RICOH Ri 1000 User Manual.
- Improved internal memory utilization which increases the service life of the internal memory.
- Minor bug fixes.
Version 01.35.8
Release date: October 21, 2021
For instructions on updating firmware, please refer to Chapter 9 of the RICOH Ri 1000 User Manual.
- Auto maintenance continues to occur in most, but not all, error states, and if printer is left unattended in the middle of manual maintenance where the carriage is undocked while still powered on the printer will dock and resume normal operation after some time.
- Feeler recover logic has changed so that feeler recover does not occur while the printer is idle but does initiate for any printing and maintenance. This can avoid the rare case of ink waste due to feeler recovery when the printer is idle.
- Minor bug fixes.
Version 01.35.4
Release date: August 4, 2021
For instructions on updating firmware, please refer to Chapter 9 of the RICOH Ri 1000 User Manual.
- Minor bug fixes including correcting high/low temperature detection.
Version 01.34.7 (8 MB)
Release date: January 11, 2021
- IMPORTANT! Please be sure to update both GIB and CTL for firmware changes to take effect: Improved flushing sequence when flushing the lines with cleaner.
Version 01.34.6 (8,601 KB)
Release date: March 6, 2020
- Added print head protection. When White ink reaches 1%, pop-up warning appears and printing is automatically disabled until new cartridge is installed.
Version 01.34.5 (8,598 KB)
Release date: January 08, 2020
- Added option to print multiple copies
Version 01.34.03 (8,736 KB)
Release date: November 25, 2019
- Added waste ink bottle "almost full" and "full" pop-up message
- Added end of life pop-up warning for consumables parts (ink supply, carriage, maintenance unit, etc.)
Version 01.34.02 (8,503 KB)
Release date: October 10, 2019