![IC-Logo-white-150.png]](https://ricohdtg.com/hs-fs/hubfs/Logos/IC-Logo-white-150.png?height=50&name=IC-Logo-white-150.png){kind=logo}
Legacy Printers
Includes articles for Ri 3000/Ri 6000, AnaJet mPower, and AnaJet Spark
RICOH Ri 3000/Ri 6000
- Ricoh DTG University for Ri 3000/Ri 6000
- Connecting Power
- Filling the Ink
- Leveling the Printer
- Moving Print Table
- Network connection setup
- New Printer Setup
- Powering Down
- Powering Up
- Pre-print system checks
- RICOH Ri 3000/Ri 6000 Diagram
- Installing firmware updates on RICOH DTG Ri 3000 and Ri 6000
- Verifying the firmware version
- Cleaning the encoder strip
- Print Head Clean
- Replacing drip pan foam
- Replacing ink cartridges
- Video: Ri 3000/Ri 6000 Maintenance
- Video: White ink maintenance & troubleshooting
- Application error on startup
- Colors are wrong or missing
- Head Voltage Error
- Home Carriage Timeout
- Home Table Timeout
- Ink Cartridge Check
- Laser warnings?
- Not printing anything
- Obstruction detection
- Obstruction Sensor Triggered
- Platform didn't lower
- Platform Error
- Print engine not on
- Print Head Calibration failed
- Print is faint or has gaps
- Print Nozzle Clogging
- Prints blurry or smeared
- Adjusting print table height
- Buttons
- Cap Head Delay?
- Changing Printer Settings
- Print counter
- Ri 3000/Ri 6000 printing procedure
- Transmitted Jobs Handling
AnaJet mPower
- Ricoh DTG University for mPower Printers
- Computer Requirements
- Filling the Ink - mPower
- Installing Ink Cartridges
- Navigating Print Jobs Menu
- New Printer Setup
- Cleaning Print Head Nozzle Plate
- Cleaning the maintenance station
- How to Clean RICOH DTG printers
- Performing a Nozzle Check
- Unpacking Your mPower Printer
- Flushing Ink
- Cleaning the waste ink tank
- Emptying the ink waste tank
- Flushing the maintenance station on mPower
- Print Head Clean
- Replacing drip pan foam
- Replacing ink cartridges
- Video: mPower Maintenance
- Horizontal banding
- Print Table Not in Load or Home
- Troubleshooting - mPower
- mPower Firmware update fails
- mPower Firmware Updates
- Frequently Asked Questions